Cost Analysis for RCA 59AV1, 59V1

This Radio Phono is from 1946
RCA 59AV1, 59V1
The RCA 59 AV1, 59V1,  late 40s console set.
 

Top view
On top, capacitors, numbered 10 (10 in a circle, almost dead center on the top) and 11(11 in a circle, to the right of 10) are filter capacitors that need replacing for the restoration.  Capacitor number 10 contains 3 filter capacitors and capacitor 11 contains 2 filter capacitors.  Capacitors numbered 25 & 26 (25 in a circle and 26 in a circle, to right of center and towards the front) are paper capacitors. That makes 7 capacitors on the top of the chassis in need of replacement.
 

Bottom view of chassis
Paper capacitors, numbered 12 through 33 (25 & 26 are on top) are the ones to be replaced in this restoration.   That makes 20 paper capacitors underneath in need of restoration.



 
 
 
 
Part number from pictures
Description
10a 22µf@450 Volts
10b 22µf@350 Volts
10c 47µf@160Volts
11a 22µf@450 Volts
11b 22µf@450 Volts
12 .0039µf@1600Volts
13 .0039µf@1600Volts
14 .01µf@630Volts
15 .0047µf@630Volts
16 .01µf@630Volts
17 .0022µf@630 Volts
18 .0047µf@630Volts
19 .22µf@400Volts
20 .015µf@400Volts
21 .022µf@400Volts
22 .01µf@400Volts
23 .01µf@400Volts
24 .01µf@400Volts
25 .0015µf@630Volts
26 .0047µf@630Volts
27 .1µf@400Volts
28 .047µf@400Volts
29 .0047µf@630Volts
30 .0022µf@630 Volts
31 .01µf@630Volts
32 .01µf@630Volts
33 .1µf@400Volts
There are 27 Capacitors

So on this set the restoration is cost:
15 x 27=$405.00

The price for the restoration of an RCA 59AV1 or 59V1 would be:
$405.00* + Tax* + Return Shipping*

*This is a flat rate price that includes all paper and filter capacitors. If your radio needs a repair and some additional parts are necessary, such as resistors, dial cord, line cord, dial lamps, and mica capacitors, they will be included as a part of the restoration.

If Tubes and transformers, coils and parts specific to this set that are hard to find are necessary, they are not included in the restoration cost.

*I have to charge you tax if you live in NY State.

*Whatever you paid to ship your set to me, I need to ship your set back to you.

* If I need other parts or a schematic from my supplier, you'll need to pay that shipping too.



If you need the turntable serviced it will cost an additional I'll need to send the idler and cartridge out to be rebuilt. There will be a fee from the re builder.
If you have the cartridge and idler rebuilt and send me the parts, I'll install them as part of the restoration.



Return to the Radio page, Examples page or the Main Borg page or my new Main page.


Pictures Copyright 1946 Howard W. Sams Co., Inc. This is now called "SAMs Technical Publishing". Last page update on new website October 27, 2007 at about Midnight E.D.T.